DYNAMOMETER EQUIPPED LEVER HOIST
The Dyno-Hoist provides an accurate and reliable reading of the weight of the load being lifted and displays “OVER” when you have reached 126% rated capacity of the hoist. The integrated dynamometer can display the load weight in kg or lbs. and runs on standard AA batteries with a run time of 150 hours. When not in use the battery energy saving system turns off the load cell. This scale is used for weighing loads not for trade.
FEATURES
- All-steel construction
- Steel handle with rubber grip
- Zinc plated load chain
- Forged alloy steel hooks
- Fully-enclosed gearing
- Minimal load lifting effort
- Long lasting powder coat finish
- Heavy-duty latches
- Load sheave bearings
- Weston-Style brake system
- Individual test certificate & serial number
Standards – CE, ASME B30.21, AS1418.2
| OZDH075-XXLH | OZDH150-XXLH | OZDH300-XXLH | OZDH600-XXLH | OZDH900-XXLH | ||
| Capacity (tons) | 0.75 | 1.5 | 3 | 6 | 9 | |
| Effort to Lift S.W.L. (lbs) | 31.4 | 49.50 | 72 | 76.5 | 81 | |
| Falls of Chain | 1 | 1 | 1 | 2 | 3 | |
| Load Chain Diameter (mm) | 6×18 | 8×24 | 10×30 | 10×30 | 10×30 | |
| A | 14.96 | 16.73 | 21.65 | 24.41 | 27.56 | |
| B | 5.28 | 5.91 | 7.48 | 9.53 | 12.09 | |
| Dimensional Information (in) | C | 5.71 | 6.89 | 7.68 | 7.68 | 7.68 |
| D | 11.22 | 16.14 | 16.14 | 16.14 | 16.14 | |
| E | 3.39 | 3.94 | 4.53 | 4.53 | 4.53 | |
| Hook-opening, Upper & Lower (in) | F | 1.06 | 1.42 | 1.50 | 1.89 | 2.13 |
| Net Weight of Head Only (lbs) | 16.5 | 27.94 | 45.10 | 66.00 | 96.80 |
*Standard Lift: 5, 10, 15, and 20 ft. We also do custom rigging
*Dimensions are for reference only and subject to change without notice.
WARNING CANCER AND REPRODUCTIVE HARM Some products may contain chemicals known to the state of California to cause cancer, or birth defect or reproductive harm. www.P65Warning.ca.gov
