OZ BEAM CLAMP USA
FEATURES
- Robust all-steel fully-welded construction
- Super-quick adjustment to most I-Beams (see measurements below)
- RoHS compliant zinc-plated finish
- Permanent engraved load rating
- Made in USA
Standards – ASME B30.16
(for use with manual or powered hoists)
| OZ1BCA | OZ2BCA | OZ3BCA | OZ5BCA | OZ10BCA | |
| Capacity (Tons) | 1 | 2 | 3 | 5 | 10 |
| A | 3 – 9 | 3 – 9 | 3.5 – 13 | 3.5 – 13 | 3.5 – 13 |
| B | 14.75 | 14.75 | 20.5 | 20.5 | 22 |
| C | 2.51 | 2.91 | 3.94 | 4.41 | 4.72 |
| D | 0.9 | 0.9 | 1.5 | 1.5 | 1.5 |
| E | 9.5 | 9.5 | 11 | 11 | 11.5 |
| F | 4.75 – 5.75 | 4.75 – 5.75 | 7.5 – 9 | 7.5 – 9 | 5.5 – 9.375 |
| G | 1.75 | 1.75 | 2.5 | 2.5 | 4 |
| H | .75 | .875 | .975 | 1.125 | 1.625 |
| Net Weight (lb.) | 9 | 11 | 22 | 26 | 39 |
Reduction in Working Load Limits when side loads are applied
| Angle from Vertical | 0° | 0-15° | 15-30° | 30-45° |
| Reduction Factor | none | 20% | 35% | 50% |
WARNING CANCER AND REPRODUCTIVE HARM Some products may contain chemicals known to the state of California to cause cancer, or birth defect or reproductive harm. www.P65Warning.ca.gov